Mechanical Engineering :: Manufacturing and Production Technology
- The carbide tools operating at very low cutting speeds (below 30 m/min)
- The type of reamer used for reaming operation in a blind hole, is
- High speed steel tools retain their hardness up to a temperature of
- For machining a mild steel workpiece using carbide tool, the maximum material will be removed at a temperature of
- In a CNC program block, N002 GO2 G91 X40 Z40......, GO2 and G91 refer to
- In an interchangeable assembly, shafts of size 25.000 -0.0100⁺⁰∙⁰⁴⁰ mm mate with holes of size 25.000 -0.010⁺⁰∙⁰²⁰ mm. The maximum possible clearance in the assembly will be
- In determining the various forces on the chip, Merchant assumed that the
- In order to achieve a specific surface finish in single point turning, the most important factor to be controlled is
- The factor responsible for the formation of continuous chips with built up edge is
Whatsapp
Facebook
|
A.
Circular interpolation in counter clockwise direction and incremental dimension |
|
B.
Circular interpolation in counter clockwise direction and absolute dimension |
|
C.
Circular interpolation in clockwise direction and incremental dimension |
|
D.
Circular interpolation in clockwise direction and absolute dimension |