Civil Engineering :: Airport Engineering
- As per ICAO recommendation, minimum width of safety area for instrumental runway should be
- To cope up high temperature of 196°C, the taxi ways and aprons are constructed with
- Effective length of a runway is the distance between
- The size of landing area for multi engine helicopters operating under 1 FR conditions is
- If lift off distance of an craft is 2000 m, the clear way at the end of the runway should not be less than
- Total correction for elevation, temperature and gradient for a runway should not be more than
- Which of the following is used for servicing and repairs of the aircraft?
- The length of a runway under standard atmospheric conditions is 1800 m. If the actual reduced level of the site is 1200 m, the design length of the runway is
- The reduced level of the proposed site of an air port is 2500 m above M.S.L. If the recommended length by I.C.A.O. for the runway at sea level is 2500 m, the required length of the runway is
- For the proposed runway stated in if the aerodrome reference temperature is 17.2°, the net designed length of the runway is
Whatsapp
Facebook
|
A.
Ends of the runway |
|
B.
Point of intersection of the obstruction clearance line and the extended plane of the runway surface, and the other end of the runway |
|
C.
Point of intersection of the glide path and the extended plane of the runway surface and the other end of the runway |
|
D.
Ends of the clear way on either side |