Home / EEE / Inductors :: General Questions

EEE :: Inductors

  1. An inductance of 0.08 H is larger than

  2. A.
    0.0000008 H
    B.
    0.000000008 H
    C.
    0.000008 H
    D.
    0.00008 mH

    View Answer

    Workspace

    Discuss Discuss in Forum


  3. A 240 H inductor is equivalent to a

  4. A.
    0.240 mH inductor
    B.
    0.000240 mH inductor
    C.
    240 mH inductor
    D.
    240 H inductor

    View Answer

    Workspace

    Discuss Discuss in Forum


  5. A 2 mH, a 3.3 mH, and a 0.2 mH inductor are connected in series. The total inductance is

  6. A.
    55 mH
    B.
    less than 0.2 mH
    C.
    less than 5.5 mH
    D.
    5.5 mH

    View Answer

    Workspace

    Discuss Discuss in Forum


  7. A 5 mH, a 4.3 mH, and a 0.6 mH inductor are connected in parallel. The total inductance is

  8. A.
    9.9 mH
    B.
    greater than 5 mH
    C.
    9.9 mH or greater than 5 mH
    D.
    less than 0.6 mH

    View Answer

    Workspace

    Discuss Discuss in Forum


  9. The voltage across a coil when di/dt = 20 mA/s and L = 8 H is

  10. A.
    16 mV
    B.
    160 mV
    C.
    1.6 mV
    D.
    2.5 mV

    View Answer

    Workspace

    Discuss Discuss in Forum


  11. A sine wave voltage is applied across an inductor. When the frequency of the voltage is decreased, the current

  12. A.
    is increased
    B.
    is decreased
    C.
    does not change
    D.
    momentarily goes to zero

    View Answer

    Workspace

    Discuss Discuss in Forum


  13. Two 10 H inductors are in parallel and the parallel combination is in series with a third 10 H inductor. What is the approximate total reactance when a voltage with a frequency of 7 kHz is applied across the circuit terminals?

  14. A.
    219 k
    B.
    66 k
    C.
    660 k
    D.
    1.3 M

    View Answer

    Workspace

    Discuss Discuss in Forum


  15. An ohmmeter is connected across an inductor and the pointer indicates zero ohms. The inductor is

  16. A.
    good
    B.
    open
    C.
    shorted
    D.
    partly shorted

    View Answer

    Workspace

    Discuss Discuss in Forum


  17. Two inductors, L1 and L2, are in parallel. L1 has a value of 25 H and L2 a value of 50 H. The parallel combination is in series with L3, a 20 H coil. The entire combination is across an ac source of 60 Vrms at 300 kHz. The total rms current is

  18. A.
    87 mA
    B.
    870 mA
    C.
    87 A
    D.
    337 mA

    View Answer

    Workspace

    Discuss Discuss in Forum


  19. An inductor, a 1 k resistor, and a switch are connected in series across a 6 V battery. At the instant the switch is closed, the inductor voltage is

  20. A.
    0 V
    B.
    6 V
    C.
    12 V
    D.
    4 V

    View Answer

    Workspace

    Discuss Discuss in Forum