Mechanical Engineering :: Production Engineering
-
Segmental chips are formed during machining
-
If the diameter of the hole is subject to considerable variation, then for locating in jigs and fixtures, the pressure type of locator used is
-
Side rake angle of a single point cutting tool is the angle
-
Internal gears can be made by
-
In order to prevent tool from rubbing the work __________ on tools are provided.
-
The silicon carbide abrasive is chiefly used for grinding
-
Drilling is an example of
-
A round nose tool may be fed eitner from left to right end or from right to left end of the lathe bed.
-
When the cutting edge of the tool is dull, then during machining
Whatsapp
Facebook
|
A.
by which the face of the tool is inclined towards back
|
|
B.
by which the face of the tool is inclined sideways
|
|
C.
between the surface of the flank immediately below the point and a plane at right angles to the centre line of the point of the tool
|
|
D.
between the surface of the flank immediately below the point and a line drawn from the point perpendicular to the base
|