Computer Science :: Computer Networking
- Which of the following is true regarding VLANs?
- Which protocol reduces administrative overhead in a switched network by allowing the configuration of a new VLAN to be distributed to all the switches in a domain?
- Which of the following is true regarding VTP?
- Which of the following commands sets a trunk port on a 2960 switch?
- When a new trunk link is configured on an IOS-based switch, which VLANs are allowed over the link?
-
Which of the following modes are valid when a switch port is used as a VLAN trunk?
1. Blocking
2. Dynamic auto
3. Dynamic desirable
4. Nonegotiate
5. Access
6. Learning -
To configure the VLAN trunking protocol to communicate VLAN information between two switches, what two requirements must be met?
1. Each end of the trunk link must be set to the IEEE 802.1e encapsulation.
2. The VTP management domain name of both switches must be set the same.
3. All ports on both the switches must be set as access ports.
4. One of the two switches must be configured as a VTP server.
5. A rollover cable is required to connect the two switches together.
6. A router must be used to forward VTP traffic between VLANs. - You want to improve network performance by increasing the bandwidth available to hosts and limit the size of the broadcast domains. Which of the following options will achieve this goal?
- Which of the following provide inter-switch VLAN communication? 1. ISL 2. VTP 3. 802.1Q 4. 802.3Z
|
A.
You must have at least two VLANs defined in every Cisco switched network. |
|
B.
All VLANs are configured at the fastest switch and, by default, propagate this information to all other switches. |
|
C.
You should not have more than 10 switches in the same VTP domain. |
|
D.
VTP is used to send VLAN information to switches in a configured VTP domain. |
Whatsapp
Facebook
